LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Engine Oil Cooler >> Installation

Engine Oil Cooler: Installation

NOTE: The engine oil cooler is installed on turbo models only.
  1. Install in the reverse order of removal.

    Tightening torque: 

    1. T:  54 N.m (5.5 kgf.m, 40 ft.lb)
      NOTE: Use new O-rings.
      Fig 1: Installing Engine Oil Cooler (Turbo Models Only)
      G02621909Courtesy of SUBARU OF AMERICA, INC.