LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Outback Base, 4D Wagon, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> Component Tests >> Diode Assembly >> Legacy & Outback 2002 (2.5L)

Legacy & Outback 2002 (2.5L)

CAUTION: Never use a high tension insulation tester. High tension will damage diodes.

The diode assembly houses eight diodes, four located on the positive side of the assembly and four on the negative side. See Fig 1. A diode is necessary to restrict current flow to one direction. Check all diodes for continuity. If any diode is faulty, replace diode assembly.

  1. To check continuity of proper diodes on "+" side, see Fig 2.
  2. To check continuity of proper diodes on "-" side, see Fig 3.
Fig 1: Testing Diode Assembly (Legacy & Outback 2.5L (2002)
G00211665Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Testing Continuity of Positive-Side Diodes (Legacy & Outback 2.5L (2002)
G00211666Courtesy of SUBARU OF AMERICA, INC.
Fig 3: Testing Continuity of Negative-Side Diodes (Legacy & Outback 2.5L (2002)
G00211667Courtesy of SUBARU OF AMERICA, INC.