LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (A/T Control Systems) >> MT Gear Shift Lever >> Disassembly

MT Gear Shift Lever: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Disassemble the locking wire.
    Fig 1: Disassembling Locking Wire
    G02871558Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the rod from gear shift lever.
    Fig 2: Removing Rod From Gear Shift Lever
    G02871559Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from bush B, then disconnect the stay.
    Fig 3: Removing Snap Ring From Bush B, Disconnecting Stay
    G02871560Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the boot from gear shift lever.
  5. Remove the bush and cushion rubber from stay.
    Fig 4: Removing Bush And Cushion Rubber From Stay
    G02871561Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the O-ring, then disconnect the bush D.
    Fig 5: Removing O-Ring, And Disconnecting Bush D
    G02871562Courtesy of SUBARU OF AMERICA, INC.
  7. Draw out the spring pin, then remove the bush C from gear shift lever.
    Fig 6: Removing Bush C From Gear Shift Lever
    G02871563Courtesy of SUBARU OF AMERICA, INC.