Tilt Steering Column: Removal
WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Set the vehicle on the lift.
- Disconnect battery ground cable.
- Remove airbag module. Refer to
REMOVAL & INSTALLATION
, Driver's Airbag Module.WARNING: Always refer to AIR BAG RESTRAINT SYSTEMS before performing airbag module service.
- Remove steering wheel. Refer to REMOVAL , Steering Wheel.
- Remove universal joint. Refer to REMOVAL , Universal Joint.
- Remove trim panel under instrument panel.
- Remove the screw securing lower steering column cover.
- Remove all connectors from steering column.
- Remove the two bolts under instrument panel securing steering column.
- Pull out steering shaft assembly from hole on toe board.CAUTION: Be sure to remove universal joint before removing steering shaft assembly installing bolts when removing steering shaft assembly or when lowering it for servicing of other parts.