LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Generators & Regulators) >> Adjustments >> Belt Tension

Belt Tension

WARNING: This page is about a different car, the 2004 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure deflection with 22 Lbs. (98 N) of force applied between generator and crankshaft pulley belt run. See Fig 1. If deflection is not within specification, adjust belt. See BELT DEFLECTION  table.

BELT DEFLECTION

Application In. (mm)
New .276-.354 (7-9)
Used .354-.433 (9-11)
Fig 1: Identifying Drive Belt Routing
G00351655Courtesy of SUBARU OF AMERICA, INC.