LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starting System - Service Information >> Engine Switch >> Inspection [07/2015 - ] >> Procedure

Inspection [07/2015 - ]: Procedure

  1. INSPECT ENGINE SWITCH 
    1. Resistance Inspection
      1. Disconnect the negative battery cable.

        Refer to REMOVAL [07/2015 - ]

      2. Remove the upper column cover.

        Refer to REMOVAL [07/2015 - ]

      3. Remove the meter hood.

        Refer to REMOVAL [07/2015 - ]

      4. Remove the engine switch.

        Refer to REMOVAL [07/2015 - ] 

      5. Verify that the continuity between the engine switch terminals is as indicated in the table.
        GTY489551Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        GTY490702Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If not as indicated in the table, replace the engine switch.

        Refer to REMOVAL [07/2015 - ] 

    2. LED Illumination Inspection
      1. Disconnect the negative battery cable.

        Refer to REMOVAL [07/2015 - ]

      2. Remove the upper column cover.

        Refer to REMOVAL [07/2015 - ]

      3. Remove the meter hood.

        Refer to REMOVAL [07/2015 - ]

      4. Remove the engine switch.

        Refer to REMOVAL [07/2015 - ] 

      5. Apply battery positive voltage and connect the ground to the engine switch terminals and verify that the LED illuminates as indicated in the table.
        GTY488652Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        1. If the LED does not illuminate as indicated in the table, replace the engine switch.
          GTY488893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

          Refer to REMOVAL [07/2015 - ]