LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> FR-S Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Service Information) >> ECM >> Installation [12/2013 - ] >> Installation [12/2013 - ]

Installation [12/2013 - ]

  1. INSTALL ECM BRACKET 
    1. Engage the 2 claws to install a new ECM bracket to the ECM.
      NOTE:
      • After attaching the ECM bracket to the ECM, do not remove the ECM bracket.
      • If the ECM bracket is attached to the ECM in the incorrect direction, replace the ECM bracket with a new one.
  2. INSTALL ECM 
    NOTE:

    When replacing the ECM, do not use ECM with different specifications.

    1. Install the ECM with the 2 nuts.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the 4 connectors to the ECM.
      NOTE:

      Be sure to securely connect the connectors.

  3. INSTALL CERTIFICATION ECU (w/ Smart Key System) 

    Refer to INSTALLATION [12/2013 - ]

  4. INSTALL CONTROL UNIT RELAY ASSEMBLY (w/o Smart Key System)  . Refer to INSTALLATION [07/2013 - ] - Step 1
  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to INSTALLATION [12/2013 - ] - Step 3
  6. INSTALL INSTRUMENT SIDE PANEL RH  . Refer to INSTALLATION [12/2013 - ] - Step 7
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) 

  8. PERFORM INITIALIZATION  See step  6