LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Removal

Removal






FA20 ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL; 2013 MY FR-S [03/2012 -]

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

2. REMOVE VVT SENSOR (for Intake Side of Bank 1)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

(c) Remove the O-ring from the VVT sensor.

3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

(c) Remove the O-ring from the VVT sensor.

4. REMOVE VVT SENSOR (for Intake Side of Bank 2)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

(c) Remove the O-ring from the VVT sensor.

5. REMOVE NO. 1 ENGINE UNDER COVER Removal

6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)

(a) Disconnect the VVT sensor connector.





(b) Remove the bolt and VVT sensor.

(c) Remove the O-ring from the VVT sensor.