LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2012 >> xD Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes (P0420-P1605)) >> SFI System >> DTC P0500: Vehicle Speed Sensor "A" >> Monitor Description

Monitor Description

Automatic Transaxle: 

The ECM assumes that the vehicle is being driven when the indicated engine speed is more than 2210 rpm and 30 seconds have elapsed since the Park/Neutral Position (PNP) switch was turned OFF (typical example values). If there is no speed signal from the combination meter, despite these conditions being met, the ECM interprets this as a malfunction in the speed signal circuit. The ECM then illuminates the MIL and stores the DTC.

Manual Transaxle: 

The ECM assumes that the vehicle is being driven when fuel cut with the accelerator pedal released continues for 5 seconds or more. If there is no speed signal from the combination meter, despite this condition being met, the ECM interprets this as a malfunction in the speed signal circuit. The ECM then illuminates the MIL and stores the DTC.