LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2011 >> tC Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Inspection >> Inspection

Cruise Control Main Switch: Inspection: Inspection

  1. INSPECT CRUISE CONTROL MAIN SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Measuring The Resistance Of Cruise Control Main Switch
      GTY310423Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Component without harness connected
      (Cruise Control Main Switch)
      - -

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 (ECC) - 3 (CCS) Neutral 1 MΩ or higher
      1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
      1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
      1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
      1 (ECC) - 3 (CCS) Main Switch OFF 1 MΩ or higher
      1 (ECC) - 3 (CCS) Main Switch ON Below 2.5 Ω

      If the result is not as specified, replace the cruise control main switch.