LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> tC Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 2AZ-FE Fuel >> Fuel Pressure Pulsation Damper >> Installation

Fuel Pressure Pulsation Damper: Installation

  1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY 
    1. Apply a light coat of the gasoline or spindle oil to the O-ring of the fuel pressure pulsation damper.
      Fig 1: Identifying O-Ring On Fuel Pressure Pulsation Damper
      G05538463Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the fuel pressure pulsation damper with the 2 bolts.

      Torque: 9.0 N*m (90 kgf*cm, 80 in.*lbf) 

      NOTE: Make sure that the O-ring is not cracked or jammed when installing.
      Fig 2: Locating Fuel Pressure Pulsation Damper With Bolts
      G05538464Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL MAIN TUBE  (See INSTALLATION  )
  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL ENGINE COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT FOR FUEL LEAK 
  7. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.