Torque Specifications
TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Generator at Engine: for bolt A | 18.5 | 189 | 14 |
| Generator at Engine: for bolt B | 54 | 550 | 40 |
| Vane pump at Engine | 44 | 449 | 33 |
| No. 2 camshaft bearing cap at Cylinder head | 13 | 1339 | 9 |
| No. 1 camshaft bearing cap at Cylinder head | 23 | 235 | 17 |
| Camshaft timing sprocket at No. 2 camshaft | 64 | 653 | 47 |
| Screw plug at Timing chain cover | 15 | 153 | 11 |
| Cylinder head cover at Cylinder head | 10 | 102 | 7 |
| Ignition coil at Cylinder head cover | 9.0 | 92 | 80 in.*lbf |
| No. 2 cylinder head cover at Cylinder head | 7.0 | 71 | 62 in.*lbf |
| No. 1 chain vibration damper at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| Chain tensioner slipper at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| No. 1 chain tensioner at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| Engine mounting insulator RH at Engine and body: for bolt A | 45 | 459 | 33 |
| Engine mounting insulator RH at Engine and body: for bolt B | 52 | 530 | 38 |
| Liquid tube at Body | 9.8 | 100 | 7 in.*lbf |
| Camshaft timing oil control valve at Cylinder head | 7.5 | 76 | 66 in.*lbf |
| Crankshaft pulley at Crankshaft | 128 | 1,305 | 95 |
| Oil pan drain plug at No. 2 oil pan | 37.5 | 383 | 28 |
| Stud bolt at Cylinder head: for bolt A | 10 | 102 | 7.4 in.*lbf |
| Stud bolt at Cylinder head: for bolt B | 4.0 | 41 | 35 in.*lbf |
| Stud bolt at Cylinder head: for bolt C | 10 | 102 | 7.4 |
| Stud bolt at Cylinder head: for bolt D | 9.0 | 92 | 80 in.*lbf |
| Oil control valve filter at Cylinder head | 30 | 306 | 22 |
| No. 1 taper screw plug at Cylinder head | 44 | 449 | 33 |
| Cylinder head at Cylinder block | 1st: 29 2nd: 90° 3rd: 90° |
1st: 300 2nd: 90° 3rd: 90° |
1st: 22 2nd: 90° 3rd: 90° |
| Camshaft timing gear at No. 1 camshaft | 64 | 653 | 47 |
| Oil dipstick guide at Cylinder head | 9.0 | 92 | 80 in.*lbf |
| Intake manifold at Cylinder head | 30 | 306 | 22 |
| Exhaust manifold support bracket at Cylinder block and exhaust manifold | 44 | 449 | 32 |
| No. 1 exhaust manifold heat insulator at Exhaust manifold | 8.0 | 82 | 71 in.*lbf |
| Front exhaust pipe at Exhaust manifold | 43 | 438 | 32 |
| Water filler at Body | 7.5 | 76 | 66 in.*lbf |
| No. 1 water by-pass pipe at Engine | 9.0 | 92 | 80 in.*lbf |
| Engine hanger at Cylinder block | 40 | 408 | 30 |
| Engine coolant temperature sensor at Cylinder head | 20 | 204 | 15 |
| Exhaust manifold at Cylinder head | 27 | 275 | 20 |
| Booster vacuum tube at Cylinder head | 9.0 | 92 | 80 in.*lbf |
| Drive plate at Crankshaft | 88 | 900 | 65 |
| Flywheel at Crankshaft | 1st: 49 2nd: 90° |
1st: 500 2nd: 90° |
1st: 36 2nd: 90° |
| Engine and transaxle assembly at Suspension crossmember | 64 | 653 | 47 |
| Engine mounting bracket LH at Engine mounting insulator LH | 49 | 500 | 36 |
| Front suspension crossmember at Body: for bolt A | 116 | 1,183 | 86 |
| Front suspension crossmember at Body: for bolt B | 70 | 714 | 52 |
| Front suspension member reinforcement LH at Front suspension crossmember and body | 47 | 479 | 35 |
| Front suspension member reinforcement RH at Front suspension crossmember and body | 47 | 479 | 35 |
| Front suspension arm lower LH at Steering knuckle | 98 | 999 | 72 |
| Tie rod end LH at Steering knuckle | 49 | 500 | 36 |
| Speed sensor frond LH at Steering knuckle | 8.0 | 82 | 71 |
| Front axle hub LH nut at Drive shaft | 216 | 2,203 | 160 |
| Cylinder block water drain cock at Cylinder block | 35 | 357 | 26 |
| Stud bolt at Cylinder block | 5.0 | 51 | 44 |
| Crankshaft bearing cap at Cylinder block | 1st: 22 2nd: 90° |
1st: 224 2nd: 90° |
1st: 16 2nd: 90° |
| Connecting rod cap at Connecting rod | 1st: 15 2nd: 90° |
1st: 153 2nd: 90° |
1st: 11 2nd: 90° |
| Oil pan at Cylinder block | 24 | 245 | 18 |
| Oil strainer at Cylinder block | 11 | 112 | 8.1 |
| No. 2 oil pan at Oil pan | 9.0 | 92 | 80 in.*lbf |
| Oil filter union at No. 2 oil pan | 30 | 306 | 22 |
| Oil filter at Oil filter union | 17.5 | 178 | 13 |
| Camshaft position sensor at Cylinder head | 8.0 | 82 | 71 in.*lbf |
| Timing chain cover at Cylinder head and cylinder block: for bolt A | 24 | 245 | 18 in.*lbf |
| Timing chain cover at Cylinder head and cylinder block: for bolt B | 11 | 112 | 8.1 in.*lbf |
| Timing chain cover at Cylinder head and cylinder block: for bolt C | 11 | 112 | 8.1 in.*lbf |
| Timing chain cover at Cylinder head and cylinder block: for bolt D | 24 | 245 | 18 |
| Timing chain cover at Cylinder head and cylinder block: for nut E | 24 | 245 | 18 |
| Water pump at Timing chain cover | 11 | 112 | 8 |
| Engine mounting bracket RH at Timing chain cover | 55 | 561 | 41 |
| Water pump pulley at Water pump | 15 | 153 | 11 |
| Fuel delivery pipe at Cylinder head: for bolt A | 19 | 194 | 14 |
| Fuel delivery pipe at Cylinder head: for bolt B | 9.0 | 92 | 80 in.*lbf |
| Camshaft timing oil control valve at Cylinder block | 7.5 | 76 | 66 in.*lbf |
| Ventilation valve at Cylinder head cover | 27 | 275 | 20 |
| Water inlet at Cylinder block | 9.0 | 92 | 80 in.*lbf |
| Spark plug at Cylinder head cover | 18 | 184 | 13 |