LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Replacement (LE5) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Exhaust Heat Shield & Bolts
    GM1593131Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the exhaust manifold heat shield bolts and shield.
    3. Fig 2: Identifying Catalytic Converter Components
    GM1592527Courtesy of GENERAL MOTORS CORP.
  3. Remove the catalytic converter to exhaust manifold nuts (1).
    4. Fig 3: Identifying CPA Retainer & HO2S Electrical Connector
    GM1592538Courtesy of GENERAL MOTORS CORP.
  4. Remove the connector position assurance (CPA) retainer.
  5. Disconnect the engine wiring harness electrical connector (3) from the position 2 heated oxygen sensor (HO2S).
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    7. Fig 4: View Of Catalytic Converter-To-Catalytic Converter Brace Bracket Bolt
    GM1592529Courtesy of GENERAL MOTORS CORP.
  7. Remove the catalytic converter to catalytic converter brace bracket bolt.
    8. Fig 5: View Of Catalytic Converter-To-Muffler Nuts
    GM1593749Courtesy of GENERAL MOTORS CORP.
  8. Remove the catalytic converter to muffler nuts.
  9. Separate the exhaust pipe from the catalytic converter studs.
  10. Position and support the exhaust pipe out of the way.
    11. Fig 6: Identifying Catalytic Converter Components
    GM1592527Courtesy of GENERAL MOTORS CORP.
  11. Remove the catalytic converter and gasket (2).
scientia non olet · About LEMON Manuals