LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Astra XR, 2D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC P0705 >> Circuit/System Testing

Circuit/System Testing

  1. Disconnect the Selector Position Switch harness at the switch.
  2. Ignition ON, verify the scan tool Selector Position Switch A/B/C/PA parameter displays OFF for all four signal circuits.
    • If not the specified value, replace the TCM.
  3. Connect a 3-amp fused jumper wire between each transmission range signal circuit terminal listed below and B+. The appropriate scan tool A/B/C/PA parameter should display ON when the terminal is connected to B+.
    • Switch Signal A
    • Switch Signal B
    • Switch Signal C
    • Switch Signal PA
    • If not the specified value, replace the TCM.
  4. If all circuits test normal, test or replace the Selector Position Switch.