LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Diagnostic Information And Procedures >> DTC C0244 >> Circuit Description

Circuit Description

The electronic brake and traction control module (EBTCM) and the engine control module (ECM) simultaneously control the traction control. The ECM reduces the amount of torque supplied to the drive wheels by retarding spark timing and selectively turning OFF the fuel injectors. The EBTCM actively applies the brakes to the front wheels in order to reduce torque.

The electronic brake control module (EBCM) supplies approximately 12 volts through an internal resistor to the ECM on the delivered torque signal circuit. The ECM toggles this voltage to ground in order to create the delivered torque signal at the EBCM. A signal with a frequency of 128 Hz +/-5 percent and a duty cycle of 25-95 percent is a valid delivered torque signal. The percentage of duty cycle is proportionate to the percentage of delivered engine torque.