LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement (Engine to Chassis) >> Installation Procedure

Installation Procedure

  1. Position the ground cable as noted during removal.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ground cable to side rail bolt (2).

    Tighten:  Tighten the bolt to 20 N.m (15 lb ft).

  4. Fig 1: View Of Ground Cable
    GM868003Courtesy of GENERAL MOTORS CORP.
  5. Install the ground cable to the rear of the engine (1).

    Tighten:  Tighten the ground to engine block nut to 17 N.m (13 lb ft).

  6. Tape the ground cable to the wiring harness near the transmission.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .