LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> LW200 >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Brakes >> Disc Brakes >> Disc Brakes Service Specifications

Disc Brakes Service Specifications

DISC BRAKE COMPONENT SPECIFICATIONS

Application In. (mm)
Front Brakes
Caliper Bore Diameter (Front) 2.24 (57)
Rotor Discard Thickness (1) 0.87 (22.8)
Rotor Maximum Allowable Lateral Runout 0.001 (0.03)
Rotor Maximum Allowable Scoring 0.059 (1.5)
Rotor Maximum Allowable Thickness (Variation) 0.0003 (0.008)
Rotor Minimum Allowable Thickness (After Refinish) 0.9 (23.1)
Rotor Thickness (NEW) 0.98 (25)
Rear Brakes
Caliper Bore Diameter (Rear) 1.38 (35)
Rotor Discard Thickness (1) 0.31 (8)
Rotor Maximum Allowable Lateral Runout 0.001 (0.03)
Rotor Maximum Scoring 0.059 (1.5)
Rotor Maximum Allowable Thickness (Variation) 0.0004 (0.01)
Rotor Minimum Allowable Thickness (After Refinish) 0.35 (9)
Rotor Thickness (NEW) 0.39 (10)
(1) All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing rotor, replace any rotor that does not meet minimum thickness specification.