Manual Shift Shaft Assembly: Removal
CAUTION:
If manual shift shaft is rotated excessively, internal damage to the transaxle range switch may occur.
- Remove valve body cover and valve body. See VALVE BODY .
- Prevent manual shift shaft from rotating by holding control lever. When removing inner nut, take care not to drop nut into transaxle by placing a rag under nut to catch it. Remove manual shift shaft assembly inner nut, manual valve link, park pawl lever, and manual detent lever. See Fig 1 .
- Remove 2 transaxle range switch bolts and disconnect electrical connectors. Slide transaxle range switch and manual shift shaft assembly out of transaxle case. See Fig 2 . Place manual shift shaft assembly in a soft jaw vise and remove outer lever nut, lever, and transaxle range switch. See Fig 3 .