Special Care During Mechanical Repairs
In some instances, it may be necessary to remove the steering column or instrument panel to access blower motor housing, heater assembly, evaporator assembly and other related A/C-heater system components. Observe specific manufacturer SERVICE PRECAUTIONS when working on vehicle with an air bag system.
Electrical sources should NEVER be allowed near inflator on back of air bag module. NEVER probe air bag system electrical wires with an analog volt-ohmmeter or test light. Always disable air bag system before servicing vehicle. See appropriate DISABLING & ACTIVATING AIR BAG SYSTEM procedure. Failure to disable system properly may result in accidental air bag deployment and possible personal injury.
If air bag system is not fully functional for any reason, DO NOT drive vehicle until system is repaired and functions properly. DO NOT remove bulbs, modules, sensors or other components, or in any way disable system from operating normally. If air bag system is not functional, park vehicle until system is repaired and functions properly.