LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1996 >> SC2 Automatic, MP7 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis >> Testing >> DTC P0745 - Low Line Pressure >> Diagnostic Procedure

Diagnostic Procedure

  1. Determine if DTC P0746 is present. This flag must be eliminated first as a possible cause for DTC P0745.
  2. Check actuator operation. See ACTUATOR QUICK CHECK  under SELF-DIAGNOSTIC SYSTEM  . Operation sound of all actuators should be similar.
  3. Perform hydraulic pressure tests. See HYDRAULIC PRESSURE TESTS in AUTO TRANS OVERHAUL - SATURN TRANSAXLE article. Ensure pressure increases in correct increments during pressure test. If pressure changes erratically and moves in large increments, pressure regulator valve is probably stuck. If necessary, see HYDRAULIC PRESSURE TESTS in AUTO TRANS OVERHAUL - SATURN TRANSAXLE article.
  4. If no gears are available, DTC P0730 will probably also set. If only reverse operates, 1st clutch leak is most likely. If vehicle does not move, check for broken input or output shaft.
  5. Also inspect actuator (faulty, sticking or damaged). Inspect pressure regulator valve for sticking or stuck. Other items that are possible; internal leak, restricted suction filter and/or pump malfunction.