LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2008 >> 9-3 2.0T, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Repair Instructions >> Alternator, B284 >> To remove

To remove

  1. Remove the battery cover and disconnect the negative battery cable.
  2. Raise the car.
  3. Remove the front right wheel.
  4. Remove the right-hand wing liner.
    Fig 1: Illustration For Step 4
    G05054037Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Relieve the belt tensioner and unhook the belt. Use a 1/2" drawbar handle.
    Fig 2: Illustration For Step 5
    G05054038Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the bolt from the steering swivel member, lower the suspension arm and place a 83 95 238 WEDGE  between the suspension arm and the anti-roll bar.
    Fig 3: Illustration For Step 6
    G05054039Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Tap the drive shaft out of the intermediate shaft with a brass drift and large hammer. Move aside the drive shaft.
    WARNING: Use protective goggles to protect against flying splinters of metal.
    Fig 4: Taping Drive Shaft Out Of Intermediate Shaft With Brass Drift
    G05054040Courtesy of SAAB-SCANIA OF AMERICA, INC.
  8. Remove the alternator electrical connections.
    Fig 5: Illustration For Steps 8-10
    G05054041Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Remove the generator retaining bolts.
  10. Remove the alternator. Prise the engine somewhat to the left if necessary.