LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-2X Aero, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection (Fuel Systems) - 2.5L >> Intake Manifold >> Adjustment/Replacement >> Installation

Intake Manifold: Adjustment/Replacement: Installation

Install the intake manifold onto cylinder heads.

NOTE: Use a new gasket.

Tightening torque: 

25 Nm (2.5 kgf-m, 18.1 ft-lb) 

Fig 1: Installing Intake Manifold Onto Cylinder Head
G03871858Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the fuel hoses to fuel pipe.

NOTE: If fuel hoses are damaged, replace them with new ones.
Fig 2: Identifying Fuel Delivery Hose, Return Hose And Evaporation Hose
G03871859Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Fuel delivery hose
  2. Return hose
  3. Evaporation hose

Install the EGR pipe to intake manifold.

Tightening torque: 

34 Nm (3.4 kgf-m, 24.6 ft-lb) 

Fig 3: Installing EGR Pipe To Intake Manifold
G03871860Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to camshaft position sensor.

Fig 4: Connecting Connector To Camshaft Position Sensor
G03871861Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to oil pressure switch (A).

Fig 5: Connecting Connector To Oil Pressure Switch
G03871862Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to crankshaft position sensor.

Fig 6: Connecting Connector To Crankshaft Position Sensor
G03871863Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the knock sensor connector.

Fig 7: Connecting Knock Sensor Connector
G03871864Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connectors to engine coolant temperature sensor.

Fig 8: Connecting Connectors To Engine Coolant Temperature Sensor
G03871865Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the PCV hose (A) to intake manifold.

Connect the engine harness connectors (B) to bulkhead harness connectors.

Fig 9: Connecting Engine Harness Connectors To Bulkhead Harness Connectors
G03871866Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the brake booster hose (A).

Fig 10: Connecting Brake Booster Hose
G03871867Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the engine coolant hoses (A) to throttle body.

Fig 11: Connecting Engine Coolant Hoses To Throttle Body
G03871868Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the spark plug cords to spark plugs.

Install the power steering pump and reservoir tank to bracket.

Install the reservoir tank to bracket.

Fig 12: Installing Reservoir Tank To Bracket
G03871869Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the power steering pump switch connector (A).

Fig 13: Connecting Power Steering Pump Switch Connector
G03871870Courtesy of SAAB-SCANIA OF AMERICA, INC.

Tighten the bolts which install power steering pump bracket.

Tightening torque: 

22 Nm (2.2 kgf-m, 15.9 ft-lb) 

Fig 14: Installing Power Steering Pump Bracket
G03871871Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the power steering pipes onto the right side intake manifold protector.

Fig 15: Installing Power Steering Pipes Onto Right Side Intake Manifold Protector
G03871872Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the generator.

Install the air intake duct, air cleaner case and air intake chamber.

Connect the connector to fuel pump relay.

Connect the battery ground cable to battery.

Fig 16: Connecting Battery Ground Cable To Battery
G03871873Courtesy of SAAB-SCANIA OF AMERICA, INC.