LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Standard >> Repair and Diagnosis >> Transmission >> Clutch System >> Adjustment - Replacement >> Changing Complete Clutch >> To Fit

To Fit

Fig 1: Illustration For Steps 1 & 2
G03868718Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Place the driven plate and pressure plate on the flywheel and loosely fit the screws.

    V6 and 4-cyl. diesel:  The convex side should face the gearbox.

    Fig 2: Illustration For Steps 1 & 2
    G03868719Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Centre the driven plate with respectively 87 92 327 CENTERING TOOL, DRIVEN PLATE  or 83 95 964 CENTERING TOOL, DRIVEN PLATE, 2.2 DIESEL  and tighten the bolts alternately.

    V6 and 4-cyl diesel:  Apply Thread locking adhesive, Loctite 270 to the threads.

    Tightening torque, diesel 30 Nm (22 lbf ft) 

    Tightening torque, other models 22 Nm (16 lbf ft) 

  3. Remove flywheel locking attachment
  4. Fit the gearbox, see SUMMARY OF LUBRICANTS AND SEALANTS  .