To fit
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- Fasten a new valve to the holder with pop rivets and lift in the holder.
- Connect the vacuum hoses to the valve.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- Plug in the lower multi-connector.
- Fit the mounting plate.
- Fit the windscreen cover weatherstrip and tighten both the retaining nuts.
- Spray the two pin connector with Kontakt 61 (part no. 30 04 520) and plug it into the control valve.
- Plug in the upper multi-connector.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- Fit the cover over the engine harness connector.