LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis >> Engine Performance >> TRIONIC T7 Fuel Control System, 4-CYL. >> Adjustment - Replacement >> Resetting Triggered Limp-Home Mechanism

Resetting Triggered Limp-Home Mechanism

  1. Remove the upper engine cover.
  2. Rectify the fault
  3. Attach female connector for throttle.
  4. Turn the ignition ON.
  5. Clear diagnostic trouble codes.
  6. Turn the ignition OFF.
  7. Carefully slide the end of the spring towards the throttle body using the point of a pen or similar.
    Fig 1: Sliding End Of Spring Towards Throttle Body
    G03855710Courtesy of SAAB-SCANIA OF AMERICA, INC.
  8. At the same time, rotate the black tooth disc anticlockwise with a screwdriver. A click will be heard in its end position.
    Fig 2: Rotating Black Tooth Disc Anticlockwise
    G03855711Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Turn the pedal arm with throttle cable clockwise. Make sure that the throttle arm does not follow the movement of the pedal arm.
    Fig 3: Sliding End Of Spring Towards Throttle Body
    G03855712Courtesy of SAAB-SCANIA OF AMERICA, INC.
  10. Fit the upper engine cover.