Seat-belt warning
The seat-belt warning monitors fastening of the driver and front passenger seat-belts.
The passenger seat contains a sensor which detects if the seat is occupied. Each seat-belt buckle has a switch (Hall sensor) which is connected to the ACM (Airbag Control Module). If the seat-belt is not fastened, the ACM sends the following bus message on the I-bus:
- Driver seat-belt on - off
- Passenger seat -belt on - off
The MIU uses this message in order to light the seat-belt warning:
- Driver seat-belt warning in the main instrument panel, MIU
If the BCM has received information from the passenger seat sensor that the seat is occupied, it sends the following bus message on the I-bus:
- Passenger seat occupied
The ICM uses this message (passenger seat occupied) together with the bus message from the ACM:
- Passenger seatbelt on-off
The ICM activates a check message and symbol for the seat-belt warning via SID:
- Passenger SID seat-belt warning: Fasten seat-belt.
The belt warning light switches on each time the ignition is in the ON position and remains lit until the seat-belt is fastened.
The seat-belt warning lights when the ignition is in the ON position (+15 and +54) and when the driver or front passenger have not fastened their seat-belt.
The belt contact (70D/70P) contains a Hall sensor which detects if the belt tongue is engaged in the lock or not engaged.
The front passenger seat cushion contains a load sensor. Sensor resistance varies according to the load.