Front seat belts
The seat-belts are single-hand, three-point belts consisting of an inertia reel with pyrotechnic belt tensioner, a mechanical sensor, belt guide, belt tongue and end fittings.
4D: The inertia reel is located in the lower part of the B-pillar and sill area.
CV: The inertia reel is integrated in the seat.
The driver receives a seat -belt warning in the main instrument panel which monitors seat-belt locking. The passenger receives an SID seat-belt warning.
The inertia reel has a locking system which prevents additional unwinding in the event of a collision. The locking system is controlled by two independent activation systems, one of which is sensitive to vehicle deceleration and the other which is sensitive to belt acceleration of a certain magnitude.
4D: The seatbelts have a belt guide that allows height adjustment.
The hip strap anchorage and buckle are located in the seat frame, which allows the buckle to remain in the same longitudinal position despite seat position and adjusts to the passenger without unfastening. The buckle is equipped with a dual locking function which means that the lock catch, when fastened, is blocked by a pin. The pin opens with the normal release button.