LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Adjustment - Replacement >> Height adjustment, front >> To fit

To fit

  1. Put the seat belt's height adjustment into position and fit the screws.
    Fig 1: Illustration For Step 1-2
    G03826512Courtesy of SAAB-SCANIA OF AMERICA, INC.

    Tightening torque 37 Nm (27 lbf ft) 

  2. Fit the strap guide.
    NOTE: Make a note of the washer location. The washer is marked R or L depending on which side is to be fitted.

    Tightening torque 37 Nm (27 lbf ft) 

  3. Make sure that the height adjustment is in its lowest position.
  4. Fit the B-pillar trim.
  5. Check the operation of the seat belt.