LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Technical Description >> Detailed description >> Electrically operated driver's seat with memory function >> Memory function, storing the position

Memory function, storing the position

The switch for the memory and storage function consists of four buttons. Three buttons "1", "2" and "3" i.e. 3 memory positions and the storage button "M". The seat's memory settings are stored and programmed as follows:

  1. Set the seat to the required position using the adjustment switch.
  2. Program the settings by simultaneously pressing the M button and one of the memory buttons 1, 2 or 3.
  3. When programming is complete the audio system sounds.

4D

Fig 1: Identifying Memory Function (4D)
G03720562Courtesy of SAAB-SCANIA OF AMERICA, INC.

CV

Fig 2: Identifying Memory Function (CV)
G03720563Courtesy of SAAB-SCANIA OF AMERICA, INC.

When memorizing, the control module reads all the Hall sensors and stores their values in an internal seat memory. The seat memory is non-volatile and retains the information stored in it even if the power supply to the control module is cut.

When a new memory position is stored for the seat memory, the DSM sends information about this via the bus. DDM and PDM will then store their door mirror potentiometer values under the memory position in question (1-3).