Checking the Fuel Pressure Regulator (9-5 - 3.0L)
- Remove the engine cover.
- Remove the valve cap. Connect the Pressure Gauge Equipment (83 93 852) and Fuel Pressure Gauge Adapter (83 94 744) to the fuel-injection rail with the "safety" on. Take the "safety" off from the adapter. See Fig 1
.
- Start the fuel pump with the diagnostic tool. See Fig 2
.
- Take a reading. It should be 43 psi (3.0 bar).
- Detach the pressure regulator vacuum hose. Connect the Pressure/Vacuum Pump (30 14 883) to the coupling on the pressure regulator. See Fig 3
.
- Carefully apply positive pressure. Make sure the fuel pressure increases correspondingly.
- Release the positive pressure and apply negative pressure. Make sure the fuel pressure is reduced correspondingly.
- Release the negative pressure and remove the vacuum pump. Connect the pressure regulator vacuum hose.
- Turn off the fuel pump with the diagnostic tool.
- Put the "safety" on the adapter and remove the pressure gauge equipment from the service nipple. Screw on the valve cap.
- Fit the engine cover.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Courtesy of SAAB-SCANIA OF AMERICA, INC.