CD Changer: Function
The CD changer is powered separately (+30 circuit) from fuse 13 to pin 6 of the CD changer connector.
When the audio system is activated, the CD changer will read the "wake-up" information on the bus (pin 5 and pin 11) from the main unit. The CD changer is then activated (switched on).
The sound signal (line outputs) from the CD changer to the main unit is supplied via:
- Pins 3 and 8 for left channel
- Pins 2 and 7 for right channel
The CD changer functions are controlled by commands from the main unit via the bus.
When the CD changer is active, information is transmitted to the bus. The SID unit reads the information and shows the current status on the display.