LEMON Manuals: Even more car manuals for everyone

To fit

  1. Fit the pump shaft seal.
  2. Fit the O-ring into the pump housing.
  3. Place the rotor, pump vanes and pump ring together into the pump housing. Put the guides in place.
  4. Fit the pump shaft and pump shaft circlip.
  5. Fit the end plate and thrust washer into the pump housing.
  6. Fit the end plate O-ring.
  7. Fit the end plate and press it in using a puller. Place a sleeve between the puller and the end cover.
  8. Fit the circlip.
  9. Fit the power steering pump, see TO FIT .