LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Standard >> Repair and Diagnosis >> Transmission >> Clutch System >> Adjustment - Replacement >> Slave cylinder >> Fitting

Slave cylinder: Fitting

Fig 1: Illustration For Step 2-3
G03505098Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Apply Loctite 577 to the retaining screws, see SUMMARY OF LUBRICANTS AND SEALANTS  .
  2. Screw on the slave cylinder.

    Tightening torque 10 N.m (7 lbf ft) 

  3. Fit the delivery pipe to the slave cylinder.

    Tightening torque 22 N.m (16 lbf ft) 

  4. Bleed the slave cylinder before fitting the gearbox, see BLEEDING THE SLAVE CYLINDER  .
  5. Fit the gearbox, see Remove the gearbox, see MANUAL GEARBOX .
  6. Bleed the clutch as described in BLEEDING THE HYDRAULIC CLUTCH SYSTEM IN THE CAR  .