LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1995 >> 900 S, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - System/Component Tests - 2.0L Turbo) >> Computerized Engine Controls >> Electronic Control Module (ECM) >> Power Circuit

Power Circuit

WARNING: This page is about a different variant/trim than selected.
  1. Check for battery voltage at terminals No. 1 (Pink/White wire) and No. 48 (Pink/White wire). If battery voltage exists, go to next step. If battery voltage does not exist, repair open in Pink/White wire between ECM and fuse panel.
  2. Turn ignition on. Battery voltage should exist between ECM terminal No. 60 (Yellow/Gray wire) and ground. If battery voltage does not exist, repair open in Yellow/Gray wire.