LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1994 >> 9000 CS, 2.3 M, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> System Settings & Adjustments >> Setting Motion Detector Sensitivity

Setting Motion Detector Sensitivity

  1. Motion detector sensitivity can be increased or decreased by 13 steps from default sensitivity. Ensure alarm in transport mode and hood and trunk lid are closed. Turn key in driver's or passenger's door from neutral position to unlocked position and hold for 10 seconds until alarm sounds and direction indicators light for one second. After 10 seconds, LED will start to flash twice every second.
  2. To reduce sensitivity, turn key in driver's or passenger's door from neutral position to locked position, then back to neutral position. Wait at least 2 seconds. This procedure reduces sensitivity by one step. Repeat this procedure until desired sensitivity is obtained.
  3. To increase sensitivity, turn key in driver's or passenger's door from neutral to unlocked position, then back to neutral position. Wait at least 2 seconds. This procedure increases sensitivity by one step.
  4. When desired sensitivity has been set, turn key in driver's or passenger's door from neutral position to unlocked position twice quickly. Motion detector is now connected at programmed sensitivity and LED will start flashing once every 4 seconds.
  5. Turn key in driver's or passenger's door from neutral position to unlocked position 3 times within 2 seconds. Alarm is now deactivated and LED will go out. To return to default sensitivity, turn key from neutral position to unlocked position 3 times within 2 seconds.