LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1997 >> Boxster Automatic >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Memory Modules >> Vehicle Storage (GROUP 0, NO. 2/98)

Vehicle Storage (GROUP 0, NO. 2/98)

Publication date: 1998-12-03
Reference number: GROUP 0, NO. 2/98

VEHICLE STORAGE

VEHICLE STORAGE

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 0, NO. 2/98

VEHICLE STORAGE

Model(s): Porsche Boxster, All Model Years

Group: 0 - Entire Vehicle, General

Bulletin No.: 2/98

Part Identifier: 03

Date: December 3, 1998

VEHICLE TYPE

Boxster

MODEL YEAR

All

CONCERN

New or Pre-owned Vehicles

SITUATION

Storing of Vehicles.

CAR CARE PRODUCTS: PORSCHE CLEANING AND CAR CARE PRODUCTS

000 044 000 00

Car care set in luggage compartment (specially for Roadster & Cabriolet) consisting of: Aluminum box 000 044 000 01 Leather cleaner, 100 ml 000 044 000 02 Leather care product with jojoba oil, 100 ml 999 901 014 41 Shampoo for convertible top, 250 ml 000 044 000 17 Convertible top care product, 400 ml 000 044 000 18 Multi-purpose glass cleaner, 100 ml 999 901 013 41 Hard wax, 250 ml 999 901 016 41 Inner window cleaner, 100 ml Leather cleaning cloth and inner window cloth

000 044 000 26

Car care set in luggage compartment (General) consisting of: Aluminum box 999 901 018 41 Paint polish, 250 ml 999 901 021 41 Plastic polish, 100 ml 999 901 014 41 Washing shampoo, 250 ml 999 901 019 41 Insect remover, 500 ml 999 901 017 41 Window cleaner, 200 ml 999 901 013 41 Hard wax, 250 ml 999 901 016 41 Inner window cleaner,100 ml Leather, compressed sponge, cleaning guide

INDIVIDUAL COMPONENTS

928 628 931 00 Silicone remover 1000 ml 999 901 030 40 Cleaner for light alloy wheels / spray bottle 500 ml 999 901 031 40 Cleaner for light alloy wheels / refill bottle 1000 ml

IDENTIFICATION

The work steps listed below are identified as follows:

NEW VEHICLE = Recommended work steps for storing new vehicles.

PRE-OWNED VEHICLE = Recommended work steps for storing pre-owned vehicles.

RECOMMENDED WORK STEPS FOR STORING NEW AND PRE-OWNED VEHICLES

The following list of work steps should be carried out in dry weather conditions if possible.

PRESERVATION NEW VEHICLE

  • Do not remove paint preservative or protective covers which have been applied at the factory.

INFORMATION

The preservative (coating) applied to new vehicles must be removed after 6 months at the latest. Otherwise stains can appear in the paint work. Without preservative, a new vehicle must not be parked outside unprotected for longer than 6 weeks (possible damage to paint from environmental influences). In this case the new vehicle must be preserved again or parked in a covered shelter.

CLEANING - PRE-OWNED VEHICLE

  • Wash underbody - if necessary. The underside of the vehicle and all parts of the running gear should be free from dirt and road salt deposits.
  • Clean engine (observe warning note).
    WARNING: Engine-washing with high-pressure cleaning equipment. When washing the engine of a Boxster with high-pressure cleaning equipment, there is a danger that the vehicle interior becomes soiled and the cable sleeves are damaged. Therefore an engine lid with cut-out is required (special tool no.: 9635, part number, 000 721 963 50) to wash the engine with high-pressure cleaning equipment. The engine should only be washed in an authorized Porsche Workshop.
  • Clean vehicle thoroughly inside and out. Clean areas which are not cleaned in the car wash manually, e.g. door sills, door and lid seams, etc.
  • Clean light alloy wheels. Use the Porsche cleaner for light alloy wheels (pH value 9.5) for this. Cleaner with the incorrect pH value can damage the protective layer on the wheels.
  • After cleaning and drying the wheels, treat the outer sides with a paint care product according to the manufacturer's instructions or with acid-free grease (Vaseline). Rub in the grease vigorously with a soft cloth.

If parts which are protected from corrosion (e.g. the engine compartment) are cleaned with products which dissolve grease, then the areas, seams and joints concerned must be preserved again.

CONVERTIBLE TOP PRE-OWNED VEHICLE

If a hardtop is fitted, check that the opened convertible top is set down correctly. Lay a protective fleece (986 563 855 01) on the outside of the rear window before opening the convertible top in order to prevent pressure marks or chafing damage to the folded rear window and fitted hardtop.

When setting down or folding the convertible top, the flexible rear window and the protective fleece must form a uniform roll across the entire width. In this way the convertible top folds without wrinkling. If necessary, shape the rear window of the half-opened convertible top into a roll manually (see Technical Information Memo

GROUP 6, NO. 4A/97 .

WARNING: The convertible top rocker switch must not be actuated during the work on the rear window. Danger of injury from the convertible top and convertible top compartment lid mechanism. Therefore, switch off the ignition before reshaping the rear window manually.

The rear window can only be checked and shaped, and the protective fleece can only be laid when the hardtop is removed. A hardtop which has already been fitted must be removed to do this.

CLEANING CONVERTIBLE TOP

  • Brush the outside of the convertible top material (dry) with a soft brush in the direction of the cut of the material.
  • Wash or rinse off the outside of the convertible top material with pure water. If the exterior of the convertible top is heavily soiled, clean the convertible top material with lukewarm soapy water (e.g. washing agent for delicate fabrics) and a sponge or brush.
  • Rinse off the convertible top with pure water until no traces of the soapy water or detergent remain.

The convertible top must remain closed until it is completely dry!

SEALS PRE-OWNED VEHICLE

  • Wash soiled door, convertible lid, cover and window seals (e.g. abrasive particles, dust, road salt) with warm soapy water. Do not use chemical cleaning agents or solvents. Afterwards, treat the dry seals with talcum powder or a similar care product!
NOTE: Vaseline, glycerin or other paraffin-based products must not be used!

DRYING PRE-OWNED VEHICLE

  • After washing, perform a short brake test at a low speed and then "brake dry" the brake discs by lightly activating the brake pedal.
    CAUTION: Beware of traffic coming from behind you!
  • If weather conditions permit (dry), drive the vehicle again after washing or cleaning the convertible top to dry it.
  • If weather conditions are not suitable to drive the car to dry it (rain/snow), then park the vehicle in a dry and well-aired shelter for a period of time with the convertible top closed and the lids and doors open. Switch off the interior lighting in the vehicle (power consumption).

AFTER DRYING PRE-OWNED VEHICLE

  • Check the undersealing and restore it if necessary.
WARNING: Do not apply undersealing to or near exhaust manifolds or pipes, catalytic converters, oxygen sensors or heat shields. The undersealing can overheat during driving and ignite.

PAINT PRE-OWNED VEHICLE

  • Clean the paint surface so it is free of tar stains, oil residue, insects, etc. Carefully wash the treated areas again.
  • Restore minor paint defects (scratches, score marks or stone impacts). If corrosion has already formed, it must be thoroughly removed, a primer coat applied to the exposed metal, then top coat painted.
  • Preserve the paint surface. If the original shine of the paint cannot be restored with the usual waxing, the paint must be professionally polished.

ENGINE PRE-OWNED VEHICLE

  • Change the engine oil and oil filter shortly before storing the vehicle depending on when the oil was last changed. Warm engine up to operating temperature again after changing the oil in order for the new engine oil to be distributed throughout the oil circuit.

Use only engine oils tested and approved by Porsche!

  • If the engine was washed, spray it with a commercially available anti-corrosion agent when it has dried and cooled down. Do not spray exhaust-carrying parts.

COOLANT PRE-OWNED VEHICLE

  • Check coolant level and concentration in the cooling system. The fluid level must lie between the minimum and maximum markings with the engine cold, and the vehicle on a level surface.

The cooling system is filled with a lifetime coolant at the factory. This provides protection from corrosion and freezing the whole year round to approx. -40°C (-40°F). If only water is used to top it up, then the correct mixture ratio must be restored.

Proportion of anti-freeze to water in the coolant:

50% anti-freeze gives protection to approx. -35°C (-30°F)

60% anti-freeze gives protection to approx. -40°C (-40°F)

An anti-freeze protection concentration which is higher than 60% by volume should be avoided as it dramatically reduces the heat conductivity of the coolant. Use only Porsche approved coolant! Do not use any other coolants or additives.

VEHICLES WITH A/C PRE-OWNED VEHICLE

  • Before storing the vehicle, perform a function test performed of the air conditioning system. See Technical Manual for specifications.
  • The cooling efficiency of the air conditioning should be fully ensured.
  • Refrigerant must be at proper levels before storing the vehicle. Otherwise there is a danger of corrosion in the refrigerant circuit if the vehicle is idle for a long period of time.
NOTE: Air conditioning servicing can only be performed at authorized workshops!

VEHICLE INTERIOR PRE-OWNED VEHICLE/NEW VEHICLE

  • Check the vehicle interior for moisture, especially in the area of the carpets. If necessary, dry damp patches thoroughly with a blow-dryer. Be careful not to singe the carpet with excessive heat.

Carry out the following work steps immediately before parking the vehicle:

BRAKES PRE-OWNED VEHICLE/NEW VEHICLE

  • The brake discs, parking brake drums and brake pads/hand brake shoes must be dry in order to protect them from corrosion during the idle period. "Brake dry" the parking brake and footbrake at low speed if necessary as described previously.

TIRES PRE-OWNED VEHICLE/NEW VEHICLE

  • Increase tire pressure to maximum inflation pressure displayed on tire sidewall.
NOTE: Inflation pressures must be returned to normal before driving.
NOTE: The vehicle should be parked on its wheels in order to prevent corrosion of the piston rods on the spring struts.

ELECTRICAL SYSTEM PRE-OWNED VEHICLE/NEW VEHICLE

  • Switch off all electrical loads.
  • Close convertible top (does not apply if hardtop is fitted) and door windows.
  • The battery should preferably be removed and stored in a cool, dry and frost-free place.
  • If the battery remains in the vehicle, it should be disconnected by removing the negative terminal. Charge the battery to full capacity, and again at least every 3 months.
  • We recommend a continuous trickle charge of the battery to compensate for self-discharge.
  • If the battery remains connected in the vehicle, all loads must be switched off and the ignition key must be removed. The battery must be recharged at least every 4 weeks because of the loads which are still connected such as the clock, alarm system, etc. Recommendation: Continuous trickle charge. Every exhaustive discharge (deep cycle) - especially over long periods - reduces the service life of the battery!
NOTE: A simple charging unit with a charging current of max. 0.05 A (50 milliamps), or a charging unit with a voltage limited to 13.8V is sufficient to maintain a trickle charge.
BATTERY MAINTAINER UNITS OFFERED BY PORSCHE

Part Number Description
000 043 202 56 Porsche Charge-o-mat 12V/110V
000 043 202 55 Adapter Cable

STORAGE AREA: PRE-OWNED/NEW VEHICLE

  • Park the vehicle in a dry, well-aired place if possible.

STORAGE PHASE: PRE-OWNED/NEW VEHICLE

  • Do not set the parking brake.
  • Engage second gear for manual transmission or move selector lever to position "P" for Tiptronic transmission.
  • Close doors and lids.
  • Push the vehicle a little to change its position at approx. 4 week intervals to prevent flat spots on the tires.

OUT OF STORAGE: RESTORING THE VEHICLE TO OPERATION PRE-OWNED/NEW VEHICLE

  • Recharge the battery if necessary.
  • Move shift lever to neutral or move selector lever to position "P" or "N".
  • Start engine while depressing the clutch pedal. Do not depress the accelerator!
NOTE: Do not activate the starter for longer than 10-15 seconds. If necessary, repeat the starting procedure after a pause of approx. 10 seconds. The ignition key must first be turned back to position "O".

Do not rev the engine in the warm-up period! Values which are stored in control units may be deleted when the battery is disconnected. It takes the engine control module several minutes to adapt new values after a battery has been disconnected, and this will only occur at idle. It is possible that the idle engine speed will increase or fluctuate during this time.

AIR CONDITIONING: PRE-OWNED/NEW VEHICLE

  • Only switch on the air conditioning system with the engine at a low speed (max. 2000 rpm) when initially restoring the vehicle to operation.

RADIO/PCM CODE: PRE-OWNED/NEW VEHICLE

  • After an interruption in the continuous power supply (battery disconnected), the radio code and the PCM code (if a PCM is installed) must be re-entered.

YEARLY MAINTENANCE: PRE-OWNED

If the vehicle is idle for a long period (several months), we recommend that an annual maintenance check be carried out by an authorized Porsche dealer before the vehicle is returned to operation. The length of time since the last maintenance and the vehicle mileage should of course be taken into consideration.

If no yearly maintenance is performed, the following points must be checked before returning the vehicle to operation.

  • Vehicle underside - engine, transmission and power steering - visual inspection for leaks.
  • Check oil and fluid levels in the engine, cooling system, power steering and window cleaning unit.
  • Check the function of vehicle lighting and electrical equipment.

SALES CHECK: NEW VEHICLE

  • Carry out the prescribed sales check before putting the new vehicle into operation. Remove existing preservatives, protective covers or drying agents if possible.

TIRES AND BRAKES: PRE-OWNED/NEW VEHICLE

  • Restore tire pressure to correct value.
WARNING: After a long idle period the brake disc surfaces may be corroded. As a result it is possible that the brakes only have a small effect the first times they are applied. Bed the brakes in again at a low speed. Beware of traffic coming from behind you.

REFERENCES

Boxster Technical Manual, Group 0 - Entire vehicle - General, Maintenance.

Boxster Owner's Manual - Convertible top/Hardtop and Maintenance/Care.