LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L (Lax) - DTC P0010 To DTC P0441 >> DTC P0101 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the MAF sensor.
  2. Install 3 jumper wires between the MAF sensor and the harness connector terminal as listed:
    • MAF sensor signal low circuit terminal 4
    • MAF sensor signal high circuit terminal 5
    • MAF sensor ignition positive voltage circuit terminal 3
  3. Ignition ON, measure for voltage on the MAF signal circuit when blowing air thru the MAF sensor.
    • If the signal voltage did not increase with air flow, replace the MAF sensor.