LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L (Lax) - Introduction >> Repair Instructions >> Heated Oxygen Sensor 1 Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying No. 1 Exhaust Manifold Heat Insulator Bolts
    GM2016570Courtesy of GENERAL MOTORS CORP.
  1. Remove the 4 bolts and remove the No. 1 exhaust manifold heat insulator.
  2. Fig 2: Locating Air Fuel Ratio Sensor Connector And Wire Harness Clamp
    GM2016571Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the air fuel ratio sensor connector and wire harness clamp.
  4. Fig 3: Identifying Air Fuel Ratio Sensor
    GM2016572Courtesy of GENERAL MOTORS CORP.
  5. Using SST  , remove the air fuel ratio sensor.