LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
  2. Remove the engine cover. Refer to Engine Cover Replacement and Engine Mount Replacement .
  3. Remove the right engine undercover. Refer to Engine Splash Shield Replacement - Right Side .
  4. Remove the drive belt. Refer to Drive Belt Replacement and Drive Belt Replacement .
  5. Remove the generator. Refer to Generator Replacement (2.4L) or Generator Replacement (1.8L) .
  6. Remove the coolant surge tank. Refer to Radiator Surge Tank Replacement .
  7. Remove the front bumper assembly. Refer to Front Bumper Fascia Replacement (Without GT) or Front Bumper Fascia Replacement (With GT) .
  8. Remove the washer reservoir. Refer to Windshield Washer Solvent Container Replacement .
  9. Fig 1: Identifying Electronic Brake Control Module (EBCM) Harness Connector Lock Lever & EBCM Harness Connector
    GM2022950Courtesy of GENERAL MOTORS CORP.
  10. Release the electronic brake control module (EBCM) harness connector lock lever (1).
  11. Disconnect the EBCM harness connector (2).
  12. Fig 2: Marking Brake Pipes
    GM2022956Courtesy of GENERAL MOTORS CORP.
  13. Mark the 6 brake pipes to aid in installation.
  14. Fig 3: Identifying Brake Line Clamp Bolt And Clamp
    GM2022954Courtesy of GENERAL MOTORS CORP.
  15. Remove the brake line clamp bolt (1) and clamp (2).
  16. Fig 4: View Of Brake Pipes At Brake Modulator Assembly
    GM2022955Courtesy of GENERAL MOTORS CORP.
  17. Remove the 6 brake pipes from the brake modulator assembly (1).
  18. Plug the brake pipes in order to prevent loss or contamination of brake fluid.
  19. Fig 5: Identifying Brake Pressure Modulator Bracket Bolts
    GM2022957Courtesy of GENERAL MOTORS CORP.
  20. Remove the 2 bolts (2) from the brake pressure modulator bracket (3).
  21. Remove the nut (1) and the brake pressure modulator assembly and bracket.
  22. Fig 6: Identifying Brake Pressure Modulator Assembly Bolts And Bracket
    GM2022958Courtesy of GENERAL MOTORS CORP.
  23. Remove the 3 bolts and the brake pressure modulator assembly from the bracket.