LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System & Navigation System >> Repair Instructions >> Radio Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Left Side Bracket Screws
    GM2014961Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to BATTERY DISCONNECT WARNING .
  1. Install the four screws and the left side bracket.

    Tighten:  Tighten the four bracket screws to 3 N.m (27 lb in).

  2. Fig 2: Identifying Right Side Bracket Screws
    GM2014958Courtesy of GENERAL MOTORS CORP.
  3. Install the four screws and the right side bracket.

    Tighten:  Tighten the four bracket screws to 3 N.m (27 lb in).

  4. Fig 3: View Of I/P Accessory Center Trim Plate, Radio & Fasteners
    GM2014951Courtesy of GENERAL MOTORS CORP.
  5. Connect the following from the radio:
    • The electrical connector
    • The antenna lead
  6. Install the radio to the instrument panel.
  7. Install the 4 bolts which secure the radio.

    Tighten:  Tighten the four bolts to 13 N.m (10 lb ft).

  8. Install the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .