LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Release Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cruise Control Release Switch, Electrical Connector, Locknut & Pin
    GM2015006Courtesy of GENERAL MOTORS CORP.
  1. Install the cruise control release switch (4) with the locknut (3) to the clutch pedal bracket.
  2. NOTE: Refer to Fastener Caution .
  3. Engage the pin (2)

    Tighten:  Tighten the locknut to 16 N.m (12 lb ft).

  4. Connect the cruise control release switch electrical connector (1).