LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G5 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Replacement (L61) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Catalytic Converter
    GM1650780Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW gasket onto the exhaust manifold studs.
  2. Install the catalytic converter to the exhaust manifold.
  3. NOTE: Refer to Fastener Notice .
  4. Install the exhaust manifold to the catalytic converter nuts.

    Tighten:  Tighten the catalytic converter nuts to 50 N.m (37 lb ft).

  5. Fig 2: Identifying Catalytic Converter & Muffler Pipe
    GM1650810Courtesy of GENERAL MOTORS CORP.
  6. Install a NEW gasket onto the resonator pipe studs.
  7. Install the catalytic converter to the resonator pipe nuts.

    Tighten:  Tighten the resonator pipe nuts to 30 N.m (22 lb ft).

  8. Install the (HO2S). Refer to Heated Oxygen Sensor 2 Replacement .
  9. Install the wheel drive shaft heat shield. Refer to Wheel Drive Shaft Heat Shield Replacement .
  10. Inspect the exhaust system for leaks.