LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Transmission Input Shaft Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Input Shaft Seal
    GM881162Courtesy of GENERAL MOTORS CORP.
  1. Using the J 45866  and a hammer, install the input shaft seal into the input shaft bearing retainer. See Special Tools .
    • The spring side of the seal goes toward the tool
    • Ensure the seal is installed square
    • The tool will install the seal to the correct depth
  2. Install the transmission input shaft bearing retainer. Refer to Transmission Input Shaft Bearing Retainer Replacement .
scientia non olet · About LEMON Manuals