LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Transmission Input Shaft Bearing Retainer Replacement >> Removal Procedure

Removal Procedure

  1. Remove the transmission from the vehicle. Refer to Transmission Replacement .
  2. Drain the transmission fluid. Refer to Transmission Fluid Replacement .
  3. Remove the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement .
    4. Fig 1: Input Shaft Bearing Retainer
    GM1604434Courtesy of GENERAL MOTORS CORP.
  4. Remove the input shaft bearing retainer bolts.

    Discard the bolts

  5. Remove the input shaft bearing retainer.
  6. Clean and inspect the input shaft bearing retainer. Refer to Transmission Case Cleaning and Inspection  in Unit Repair.
scientia non olet · About LEMON Manuals