Replacement Procedure

Fig 1: View Of Steering Wheel

Courtesy of GENERAL MOTORS CORP.

Callouts For Fig 1

Callout	Component Name
CAUTION: Refer to SIR Caution in Cautions and Notices. Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to INFLATABLE RESTRAINT STEERING WHEEL MODULE REPLACEMENT .
1	Steering Wheel Trim Cover Bolt (Qty: 2) NOTE: Refer to Fastener Notice in Cautions and Notices. Tighten 2 N.m (18 lb in)
2	Steering Wheel Trim Cover (Qty: 2)
3	Steering Wheel Control Switch Assembly (Qty: 2) Tip Disconnect the electrical connectors. Make sure the steering wheel control switches are properly seated to the steering wheel trim cover during installation.