LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Bonneville GXP >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle, 4T80-E (Introduction, Service & Replacement) >> Repair Instructions >> Shift Control Replacement >> Removal Procedure

Removal Procedure

  1. Remove the console trim plate. Refer to Trim Plate Replacement - Console in Instrument Panel, Gages and Console.
    2. Fig 1: View Of Shift Control
    GM891290Courtesy of GENERAL MOTORS CORP.
  2. Unsnap the shift cable terminal from the shifter pin.
  3. Remove the shift cable retaining clip (1) and the cable (2) from the shifter.
    4. Fig 2: View Of Park Lock Cable Terminal
    GM627368Courtesy of GENERAL MOTORS CORP.
  4. Disengage the locking tab on the park lock cable and lift the cable out of the slot in the shifter.
  5. Unhook the park lock cable from the park lock cam on the shifter.
  6. Disconnect the electrical wire harness connector from the shifter assembly.
    7. Fig 3: View Of Shifter Fasteners
    GM291888Courtesy of GENERAL MOTORS CORP.
  7. Remove the shifter fasteners.
  8. Spread the console side panels apart and remove the shifter assembly.
scientia non olet · About LEMON Manuals