LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Bonneville GXP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) -- 4.6L (LD8) >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: KS Electrical Connector
    GM602292Courtesy of GENERAL MOTORS CORP.
  1. Install the KS.

    Tighten:  Tighten the KS to 25 N.m (18 lb ft).

  2. Connect the KS electrical connector.
  3. Reinstall the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6L.
scientia non olet · About LEMON Manuals