LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Bonneville GXP >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LD8) >> Installation Procedure

Installation Procedure

    Fig 1: Locating Generator Mounting Bolts (LD8)
    GM780404Courtesy of GENERAL MOTORS CORP.
  1. Position the generator to the A/C compressor and engine.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the generator mounting bolts (1, 2).

    Tighten:  Tighten the generator mounting bolts to 50 N.m (37 lb ft).

    3. Fig 2: Locating Generator Output BAT Terminal Nut & Positive Lead At Generator
    GM780408Courtesy of GENERAL MOTORS CORP.
  3. Connect the wiring harness connector to the generator.
  4. Connect the battery positive lead and install the generator output BAT terminal nut.

    Tighten:  Tighten the generator output BAT terminal nut to 12.5 N.m (111 lb in).

  5. Press the protective boot on to the generator output BAT terminal.
  6. Install the engine cooling fans. Refer to Cooling Fan Replacement - Electric (L36) or Cooling Fan Replacement - Electric (LD8) in Engine Cooling.
  7. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.6L.
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals