Installation Procedure
- Align the retainers on the I/P accessory trim plate to the slots in the I/P.
- Install the retainers into the slots until the retainers are fully seated.
- Install the 2 screws to the lower trim plate.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the front floor console. Refer to Trim Plate Replacement - Front Floor Console (Aztek) or Trim Plate Replacement - Front Floor Console (Rendezvous) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.