Removal Procedure
- Raise window.
- Remove front side door trim. Refer to TRIM PANEL REPLACEMENT - Door .
- Remove inside handle seal.
- Remove water deflector. Refer to WATER DEFLECTOR REPLACEMENT - Door .
- Remove inside handle rivet by drilling out rivet with 3/16 drill bit and drill.
- Remove handle tab from door inner panel slot by sliding handle rearward.
- Remove inside handle rod from fastener on clip.
- Remove inside handle rod (1) from clip (2).
Courtesy of GENERAL MOTORS CORP.
- Remove inside handle from door inner panel.
- Remove inside handle rod clip (1) from handle (2) by using needlenose pliers to squeeze clip and push from handle.
Courtesy of GENERAL MOTORS CORP.